Unlock Cleaning Revenue on the DJI M400 Platform You Already Trust

DJI Matrice 400 Facade Cleaning Kit

Q: Is the DJI Matrice 400 included?

No. The DJI Matrice 400, original controller, TB100 batteries and BS100 charging station are not included. You can use an M400 you already own or purchase one through a local DJI Enterprise dealer. EAUAV supplies the selected cleaning kit and supporting technical materials.

Q: How does the kit connect to and control the M400?

The kit is designed for the DJI Matrice 400 and connects through DJI E-Port V2. The EAUAV PSDK control application runs within the original M400 controller workflow. The kit uses a bolt-on installation and does not require routine modification of the airframe.

Q: Will using the cleaning kit affect the DJI warranty?

The bolt-on design is intended to avoid routine airframe modification, but DJI warranty coverage and interpretation are determined by DJI and the local authorized channel. Please confirm regional warranty handling with your DJI dealer before operation.

Q: Can I buy only the spray boom or wand?

Yes, boom-only / wand-only quotation can be discussed for customers who already have their own pump, hose, and cleaning system. Interface and connector details must be confirmed.

Q: Which spray boom should I choose: Option A1 or A2?

Choose A1 for the lowest entry cost and initial workflow validation. Its foam-to-rinse workflow requires the drone to land so the operator can change the nozzle before relaunching for the rinse.Choose A2 for a smoother commercial workflow. A2 allows the operator to select the foam or pressure-rinse nozzle from the M400 controller without landing solely to change the nozzle. Option A2 is our recommended commercial starting point.

Q: Can I buy the airborne kit and use my own pump?

Yes. Option A1 or A2 can be paired with an engineering-approved existing or locally purchased pump. The initial screening baseline is at least approximately 3 kW, adjustable 12–18 MPa, and approximately 450–600 L/h.Please send the exact pump model, a clear nameplate photo, rated power, working and maximum pressure, flow rate, and outlet photos. EAUAV engineering must confirm compatibility before the pump is connected to the cleaning kit.

Q: What is the difference between Option B and Option C?

Option B combines A2 with the Kärcher HD 6/15-4 M Classic standalone pump. Its reference range is 70–150 bar, 450–600 L/h and 3.4 kW. It is the simpler matched-pump option and does not include an integrated water tank or detergent-metering system.Option C combines A2 with the integrated ground system. It includes a 300 L foldable water tank, 10 L detergent tank, integrated reel connection, remote start and water/mixed-mode selection. Its current reference is up to 15 MPa, 11 L/min and approximately 3.3 kW.

Q: What electrical information is required for Option B or C?

Before quotation, please provide the destination voltage, frequency, phase, plug or socket type, and any applicable grounding or electrical-protection requirements. EAUAV will confirm the appropriate electrical version and connection arrangement for the destination.

Q: What hose is supplied, and does 120 m mean 120 m working height?

The current standard configuration uses a 120 m lightweight high-pressure hose with a 5 mm internal diameter and a 20 MPa pressure rating.Hose length is not a guaranteed cleaning height. Routine facade projects should currently be planned below 60 m, subject to site conditions, local operating rules and onsite validation. Begin testing at approximately 1.5 m from a flat facade and adjust only after confirming spray response and aircraft stability.

Q: What flight time and battery setup should I plan for?

DJI publishes a maximum flight time of up to 59 minutes for the M400 under specified test conditions without the cleaning payload. For cleaning operations with the spray boom and water hose, plan for approximately 30 minutes per flight.Actual endurance depends on wind, hose drag, suspended hose length, operating profile and battery condition. We recommend preparing three TB100 batteries and rotating them between flight, charging and standby.

Turn a locally sourced DJI Matrice 400 into a professional water-fed facade cleaning platform with lightweight spray boom, PSDK / E-Port V2 control, Kärcher-class pump or integrated mixing pump-cart options, and project-matched hose / nozzle configuration.

PSDK Integrated / E-Port V2 Workflow

Dual-Nozzle Foam-To-Rinse Workflow

Approx. 30 min Cleaning Flight

Maximizing ROI isn’t only about flying more—it’s about doing more with the platform you already have. The EAUAV M400 Facade Cleaning Kit upgrades your aircraft into a professional cleaning solution — ready for facade work, atriums, and large indoor halls.

Native Workflow

PSDK control through DJI E-Port V2. Operate with DJI remote controller

Spray Boom Choices

Choose single oscillating lance or dual-nozzle, dual-oscillating lance.

Ground System Options

Select a matched ground pump, or an integrated mixing pump cart.

Project-Ready Configuration

Match boom type, pump, hose, nozzle, chemical to the actual project.

Built for DJI Dealers, Cleaning Teams, and Existing M400 Owners

The EAUAV M400 Facade Cleaning Kit is a payload-focused conversion solution for customers who already own, sell, or operate DJI Matrice 400 aircraft. It helps turn the M400 platform into a practical facade, window, roof-rinsing, and exterior maintenance tool without replacing the customer’s existing DJI procurement channel.

For DJI Enterprise dealers

Add a new industrial application to your DJI M400 sales pipeline.

· Offer a cleaning payload without taking over aircraft supply

· Support customer projects with configuration guidance

For cleaning service teams

Launch drone-assisted facade and exterior cleaning with a familiar DJI platform.

· Choose boom-only, standard pump, or chemical mixing configuration

· Match pressure, hose, and nozzle setup to the jobsite

For Existing M400 Owners

Convert your aircraft into a project-ready cleaning tool.

· Keep local DJI aircraft support separate

· Add a lightweight water-fed spray boom

From DJI M400 Aircraft to Cleaning Revenue

A conversion kit should not feel like a one-off accessory. It needs a complete workflow: aircraft, payload, pump, hose, crew, SOP, and documentation.

Step 1:

Source or Use a DJI M400 Locally

Buy the aircraft from your local DJI Enterprise channel or use a unit already in your fleet.

Step 2:

Add the EAUAV Cleaning Payload

Install the lightweight spray boom, mounting parts, and control module after configuration confirmation.

Step 3:

Match Pump, Hose, and Nozzles

Select ground pump, hose length, nozzle pattern, and chemical mixing option for your target surfaces.

Step 4:

Prepare SOP and Safety Plan

Review site access, exclusion zone, wind, hose routing, pressure, emergency stop, and crew communication.

Step 5:

Launch Cleaning Projects

Use the M400 platform for facade, window, roof-rinsing, industrial exterior, and atrium-style projects where site conditions allow.

DJI-centered Workflow via PSDK / E-Port V2

The M400 Facade Cleaning Kit is designed around DJI Matrice 400 payload integration, using a PSDK workflow via DJI E-Port V2. Where supported by the final configuration, the operator can control cleaning functions through the original DJI controller workflow instead of adding a separate third-party spray remote.

1. Mount the cleaning payload

The spray boom is designed as a bolt-on payload for the DJI Matrice 400, using a non-invasive installation approach intended to avoid normal-use airframe modification.

2. Connect through the payload interface

The cleaning control module is designed for PSDK integration via DJI E-Port V2.

3. Operate through a DJI-centered workflow

Spray mode control, boom movement, and pump-related functions can be configured around the DJI controller workflow.

M400 Kit Configuration

Choose the Right M400 Cleaning Kit

Choose the airborne kit first. Add ground equipment only when you need it.

A1 and A2 define the airborne kit. Options B and C add different ground-equipment workflows to A2.

Option A1: Single-Nozzle Kit

Lowest-Cost Validation

EAUAV Option A1 single-nozzle oscillating boom for DJI Matrice 400

For budget-led trials that can accept nozzle or chemistry changes on the ground.

Single oscillating nozzle head
PSDK / E-Port V2 control
120 m hose, reel and fittings
Ground-level nozzle changes

Choose A1 for Validation

Recommended

Option A2: Dual-Nozzle Kit

Best Commercial Starting Point

EAUAV Option A2 dual-nozzle cleaning boom for DJI Matrice 400

Recommended when you own or can source the M400 and a compatible pump locally.

Detergent/foam and pressure-rinse heads
In-air switching from the M400 controller
120 m, 5 mm-ID hose, reel and fittings
PSDK / E-Port V2 control and App

Get Recommended A2

Option B: A2 + Kärcher Class Pump

Matched Standalone Pump

Kärcher professional high-pressure pump supplied with EAUAV M400 Option B

For buyers who do not yet have a suitable local pressure pump.

Everything in Option A2
Kärcher HD 6/15-4 M Classic
15 MPa · 450–600 L/h · 3.4 kW
Final pump version, power supply and outlet adapter confirmed for the destination

Request A2 + Pump

Option C: Integrated Ground System

A2 + Integrated Pump Cart

White EAUAV Gen-2 integrated ground pump and mixing system for DJI M400 cleaning

For buyers who want one mobile ground workflow for pressure, reel and detergent control.

Everything in Option A2
Integrated ground cart
300 L water tank + 10 L detergent tank
15 MPa · 11 L/min · approx. 3.3 kW
Remote start and water/mixed-mode switching

Request A2 + Ground Cart

Using your own local pump? Recommended baseline: a professional adjustable pump of at least approx. 3 kW, approx. 12–18 MPa (120–180 bar), and 450–600 L/h. Send the model, nameplate and outlet photos for compatibility review.

Need EAUAV to supply Option B or C? Please confirm destination voltage, frequency, phase and plug/socket type before quotation.

DJI Matrice 400 aircraft, flight battery, charger and local flight approvals are not included. Final configuration depends on the facade, working height, pump setup and local operating requirements.

How Water-Tethered Cleaning Works

Choose an EAUAV-supplied or engineering-approved local pump; pressurized water then flows through the cleaning kit to the facade.

Spray Boom A1 or A2: Choose Your Foam-to-Rinse Workflow

OPTION A1 — Manual Nozzle Change

Apply foam, land to change the nozzle, then relaunch for clean-water rinsing.

Best for: Lower-cost entry and initial workflow validation.

OPTION A2 — Remote Nozzle Switching

Switch from foam to pressure rinsing from the DJI controller—no landing for a manual nozzle change.

Best for: A smoother workflow with fewer interruptions.

Both options support oscillating foam application and high-pressure rinsing. The key difference is how you switch from foam to rinse: A1 requires landing for a manual nozzle change, while A2 switches nozzles directly from the DJI controller.

Choose Your Ground Pump Setup

After selecting A1 or A2, choose how the cleaning system will be pressurized from the ground. EAUAV can supply a matched standalone pump or an integrated pump cart, or our engineers can review a pump you already own or plan to purchase locally.

OPTION B - Professional Standalone Pump

A matched high-pressure pump for a straightforward jobsite setup.

Standard model: Kärcher HD 6/15-4 M Classic

Best for: Teams that need a reliable matched pump without an integrated ground cart.

Electrical details required: Local voltage · Frequency · Plug type

OPTION C - Integrated Pump Cart

The ground system integrates the high-pressure pump, hose reel and water/detergent workflow into one mobile unit.

EAUAV supplies: Integrated pump cart, hose reel and ground-side workflow system

Best for: Faster jobsite setup and a more organized commercial cleaning workflow.

Electrical details required: Local voltage · Frequency · Plug type

LOCAL / EXISTING PUMP - Use Your Own Pump

Already have a pump or prefer to purchase one locally? Send us the exact pump model, nameplate and outlet photos for compatibility review.

General pump requirement: ≥ 3 kW · Adjustable 12–18 MPa

Required from customer: Pump model · Nameplate photo

EAUAV engineering must confirm compatibility before the pump is connected to the cleaning kit.

Choose Option B for a straightforward matched pump, Option C for an integrated ground workflow, or submit your local pump for engineering approval.

POWER & FLIGHT PLANNING

Keep Cleaning Moving with a Three-Battery Rotation

For cleaning operations with the spray boom and water hose, plan for approximately 30 minutes per flight. We recommend three TB100 batteries rotating between flight, charging and standby to support repeated work cycles.

Safety Checklist for High-pressure Aerial Cleaning

High-pressure aerial cleaning requires more than a powerful pump. Stable operation depends on working distance, pressure selection, hose management, site control, pilot training, and a documented SOP.

Before each project, operators should assess:

Site access and exclusion zone
Wind and weather conditions
GNSS and obstacle environment
Surface type and sensitivity
Nozzle selection and spray distance
Pump pressure and flow settings
Hose routing, hose drag, and snag risks
Emergency stop and return workflow
Pilot and ground crew communication
Local aviation and work-at-height rules

Note: For indoor, atrium, GNSS-challenged, maritime, industrial tank, or roof projects, a site-specific review is required before operation.

Where the M400 Cleaning Kit Works Best

The M400 kit is suitable for selected exterior and controlled indoor cleaning projects where a lightweight water-fed drone payload can reduce scaffolding, rope access, or manual high-reach work.

Commercial Building Facades

Best fit: Glass curtain walls, exterior panels, hotels, offices, and mixed-use buildings.
Needs review: Height, wind, surface type, water access, and exclusion zone.
Key concern: Hose routing and pressure selection.

Windows and Facade Maintenance

Best fit: Commercial window washing and regular exterior maintenance.
Needs review: Frame geometry, access permissions, and detergent compatibility.
Key concern: Spray distance and runoff control.

Indoor Atriums and Large Halls

Best fit: Atriums, skylights, indoor glass, and controlled maintenance periods.
Needs review: GNSS environment, obstacles, ventilation, and public access.
Key concern: Indoor flight authorization and emergency plan.

Industrial Tanks & Plant Structures

Best fit: Storage tanks, silos, exterior pipes, and industrial walls.
Needs review: Surface material, chemical compatibility, and site safety rules.
Key concern: Sensitive equipment and restricted areas.

Warehouses & Logistics Facilities

Best fit: Large exterior walls, high bay doors, skylights, and canopy areas.
Needs review: Vehicle movement, roof edges, and water runoff.
Key concern: Ground crew coordination.

Ports & Maritime Maintenance

For ship operators and port service providers—cleaning ship hull sections, superstructures, and port-side facilities where traditional access is slow and labor-intensive.

M400 Cleaning Kit Field Test Gallery

Review field test clips, installation details, pump workflow, spray reach references, and real cleaning operation footage before selecting a configuration.

M400 façade cleaning operation video

M400 cleaning payload close-up on a Pickup

M400 cleaning workflow demo in Xi’an

M400 Indoor / atrium demo in Shenzhen

Field-tested spray reach demo in Hangzhou

DEALER & DISTRIBUTOR PARTNERSHIP

Bring M400 Facade Cleaning to Your Market

We supply products together with technical onboarding, software support and after-sales resources. Local partners lead customer development, demonstrations and first-line support in their markets. Partner testing and cooperation discussions are already underway in 10+ countries.

Product, Technology & After-Sales

EAUAV M400 kits and accessories
Controller software and version updates
Installation guides, SOPs and training videos
Remote onboarding and first-operation support
Warranty, spare-parts planning and sales media

Market Development & Local Support

Customer development and qualification
Local demonstrations and validation projects
M400, pump and electrical matching
Regulatory and operator guidance
First-line support and market feedback

Ready to build the market locally?

Tell us about your market, demo plan and expected annual volume.

Technical Specifications

M400 Cleaning Kit — Key Technical Data

Review the essential planning data first, then open a tab for the configuration details relevant to your project. Final compatibility is confirmed before quotation.

Platform DJI Matrice 400 only

Airborne Kit Option A1 or A2

Standard Hose 120 m · 5 mm ID

Working Height < 60 m planning

Local Pump Baseline ≥3 kW · 12–18 MPa

Cleaning Flight Plan Approx. 30 min

Starting Stand-Off Approx. 1.5 m

Battery Plan 3 × TB100 rotation

Aircraft & Airborne Cleaning Kit

Core integration data for the equipment installed on the DJI Matrice 400.

Aircraft compatibility: DJI Matrice 400 only. M300 RTK and M350 RTK are not supported as standard configurations.
Interface & control: DJI PSDK / E-Port V2 with the EAUAV control application on the original M400 controller.
Payload electrical input: 24 V via E-Port V2; peak airborne payload power consumption ≤30 W.
Option A2 boom weight: Approx. 1.4 kg net reference, excluding aircraft, hose, water and dynamic hose loads.
Primary materials: Carbon fiber, aluminum alloy and selected stainless-steel components.
Environmental protection: DJI Matrice 400 platform: IP55. This rating does not cover all ground equipment or authorize rain operation.

M400 Cleaning Kit FAQs

Clear answers on aircraft compatibility, configurations, pumps, power requirements and jobsite planning.

Is the DJI Matrice 400 included?

No. The DJI Matrice 400, original controller, TB100 batteries and BS100 charging station are not included. You can use an M400 you already own or purchase one through a local DJI Enterprise dealer. EAUAV supplies the selected cleaning kit and supporting technical materials.

How does the kit connect to and control the M400?

The kit is designed for the DJI Matrice 400 and connects through DJI E-Port V2. The EAUAV PSDK control application runs within the original M400 controller workflow. The kit uses a bolt-on installation and does not require routine modification of the airframe.

Will using the cleaning kit affect the DJI warranty?

The bolt-on design is intended to avoid routine airframe modification, but DJI warranty coverage and interpretation are determined by DJI and the local authorized channel. Please confirm regional warranty handling with your DJI dealer before operation.

Can I buy only the spray boom or wand?

Yes, boom-only / wand-only quotation can be discussed for customers who already have their own pump, hose, and cleaning system. Interface and connector details must be confirmed.

Which spray boom should I choose: Option A1 or A2?

Choose A1 for the lowest entry cost and initial workflow validation. Its foam-to-rinse workflow requires the drone to land so the operator can change the nozzle before relaunching for the rinse.
Choose A2 for a smoother commercial workflow. A2 allows the operator to select the foam or pressure-rinse nozzle from the M400 controller without landing solely to change the nozzle. Option A2 is our recommended commercial starting point.

Can I buy the airborne kit and use my own pump?

Yes. Option A1 or A2 can be paired with an engineering-approved existing or locally purchased pump. The initial screening baseline is at least approximately 3 kW, adjustable 12–18 MPa, and approximately 450–600 L/h.
Please send the exact pump model, a clear nameplate photo, rated power, working and maximum pressure, flow rate, and outlet photos. EAUAV engineering must confirm compatibility before the pump is connected to the cleaning kit.

What is the difference between Option B and Option C?

Option B combines A2 with the Kärcher HD 6/15-4 M Classic standalone pump. Its reference range is 70–150 bar, 450–600 L/h and 3.4 kW. It is the simpler matched-pump option and does not include an integrated water tank or detergent-metering system.
Option C combines A2 with the integrated ground system. It includes a 300 L foldable water tank, 10 L detergent tank, integrated reel connection, remote start and water/mixed-mode selection. Its current reference is up to 15 MPa, 11 L/min and approximately 3.3 kW.

What electrical information is required for Option B or C?

Before quotation, please provide the destination voltage, frequency, phase, plug or socket type, and any applicable grounding or electrical-protection requirements. EAUAV will confirm the appropriate electrical version and connection arrangement for the destination.

What hose is supplied, and does 120 m mean 120 m working height?

The current standard configuration uses a 120 m lightweight high-pressure hose with a 5 mm internal diameter and a 20 MPa pressure rating.
Hose length is not a guaranteed cleaning height. Routine facade projects should currently be planned below 60 m, subject to site conditions, local operating rules and onsite validation. Begin testing at approximately 1.5 m from a flat facade and adjust only after confirming spray response and aircraft stability.

What flight time and battery setup should I plan for?

DJI publishes a maximum flight time of up to 59 minutes for the M400 under specified test conditions without the cleaning payload. For cleaning operations with the spray boom and water hose, plan for approximately 30 minutes per flight.
Actual endurance depends on wind, hose drag, suspended hose length, operating profile and battery condition. We recommend preparing three TB100 batteries and rotating them between flight, charging and standby.

Do I need electrical power tethering for M400 cleaning?

No. The EAUAV M400 Cleaning Kit uses a ground-fed water hose, while the aircraft is powered by its onboard TB100 battery. We recommend three TB100 batteries rotating between flight, charging and standby for repeated cleaning cycles.
We do not recommend adding electrical power tethering to this cleaning configuration. A power cable adds suspended weight, drag and snagging or entanglement risks alongside the water hose. It also introduces additional electrical-protection requirements around water spray and complicates cable management and emergency procedures.
EAUAV does not offer an electrical power-tether option for this kit. Our recommended setup combines water supplied from the ground with battery-powered flight.

Who supplies the RO/DI water, hot water and cleaning chemicals?

EAUAV does not currently supply a self-developed and validated RO/DI water-treatment or hot-water preparation system. Customers should prepare these locally when low-mineral final rinsing or hot-water treatment is required.
Option C supports a detergent-mixing workflow, but the cleaning agent, SDS, dilution ratio, surface compatibility and local chemical requirements must be confirmed before use. Final-rinse water preparation remains the customer’s responsibility.

What technical and regulatory documents do you provide?

EAUAV can provide technical datasheets, payload and integration information, installation guidance and baseline operating SOPs, including recoil-handling notes.
The operator or local partner remains responsible for permits, pilot qualifications, insurance, site risk assessment and any SORA, EASA or local aviation-authority submission. EAUAV provides supporting product information but does not guarantee regulatory approval.

Do you support distributors and dealers?

Yes. EAUAV is already supporting partner testing and cooperation discussions in more than 10 countries. Qualified DJI Enterprise dealers, distributors, system integrators and cleaning-service partners can request dealer pricing, technical packs, demo and onboarding materials, sales media, spare-parts planning and market-development support.

Get Your Recommended M400 Configuration & Quote

Tell us what equipment you already have and where the system will operate. We’ll confirm the right A1, A2, B or C configuration, review pump and electrical compatibility, and calculate shipping to your city and postal code.